Sorting Line for Mixed Plastic

Year of construction

2014

Working hours

4.965 h

Throughput rate at a bulk weight of 170 kg/cbm

Approx. 3,5 t/h, depending on material

Installation dimensions

48.000 x 12.000 x 8.000 mm (l x w x h)

Feed bunker with conveyor belt

A-A 5.000 mm, belt width 1.400 mm, effective width 1.300 mm

Ascending conveyor

A-A 15.000 mm, belt width 1.400 mm, effective width 1.300 mm, pitch 25 °, drive 4 kW, speed 0,4 m/sec.

Vibrating screen

4.600 x 1.300 mm, two screen decks with a mesh size of 65 x 40 mm, with two vibration motors 2 x 2.5 kW

Sorting cabin

18.000 x 7.400 x 3.000 mm (l x w x h), 8 sorting places, 10 disposal chutes, 10 bunker

Sorting belt

A-A 24.000 mm, belt width 1.400 mm, pitch 0 °, drive 4 kW, speed adjustable from 0.1 to 0.4 m/sec.

Heap belt for screening material

A-A 8.000 mm, belt width 800 mm, pitch 15 °, drive 2,2 kW, speed 0,6  m/sec.

Heating / air conditioning of the sorting cabin

Air flow rate supply air 8.000 cbm/h, overpressure 800 Pa, air exchange rate 1.000 cbm/h per workstation, air filter (pocket filter) Grade F7, heating capacity 35 kW, cooling capacity 39,7 kW

Control engineering

Siemens S7 1200 with CPU 1215C

Tough Panel Siemens KPT 600

Total connected load approx. 100 kW

Comments:

The plant was commissioned in 2014 and used for sorting mixed plastics and for the re-sorting of contaminated individual fractions. The machine stock including the sorting cabin is in good condition and ready for immediate use. The actual operating time was approx. 1.5 years with only 4.965 working hours, therefore the good condition of the plant. The required transport capacity for the entire plant is approx. 6 - 8 trucks, depending on the depth of dismantling.