Baler HSM VK 8818 R-FU
VK 8818 R-FU
Why can't I enquire?
This listing expired on 24/04/2018 so you are no longer able to enquire about it.
About This Item
Baler HSM VK 8818 R-FU, press power 88 to, yoc 2012, drive power 2 x 45 kW, only 4.109 working hours, baler and conveyor are overhauled and tested
Manufacturer |
HSM |
Typ |
VK 8818 R-FU |
Year of construction |
2012 |
Hours of operation |
4.109 hours |
Numbers of pressed bales |
38.697 piece |
Press power main press |
88 to |
Specific press capacity |
107 N/cm² |
Sound pressure level |
< 80 dB (A) |
Flow rate hydraulic pump |
788 L/min. |
Feed channel |
1.800 x 970 mm (l x w) |
Capacity per cycle time |
1,3 cbm |
Theoretic cycle time |
8,3 sec. |
Theoretic throughput rate |
643 cbm/h |
Bale size |
1.100 x 750 mm (w x h) length adjustable |
Driving motor |
2 x 45 kW with frequency converter |
Oilcooler, rated output / cooling capacity |
5,5 kW / 35 kW |
Heater hydraulicoil |
1,4 kW |
Electric cabinet heater |
0,6 kW |
Connected load |
98 kW |
Rated curent total |
192 A |
Hedging |
200 A |
Tying system |
5-fold horizontal, fully automated |
Throughput rate at a |
|
bulk weight of 30 kg/cbm |
approx. 12 to/h |
bulk weight of 50 kg/cbm |
approx. 32 to/h |
Bale weight |
500 – 700 kg, depending on material |
Volume hydraulic oil tank |
2.000 L, type HVI 46 |
SPS controller (manuf., type) |
Siemens S7-300 |