Baler BOA Impress (inc Chain Belt Conveyor)
Impress D130-165-B-5/5L-1.9
Why can't I enquire?
This listing expired on 23/04/2018 so you are no longer able to enquire about it.
About This Item
Baler BOA, type Impress D130-165-B-5/5L-1.9, press power 127 to, drive power 3 x 55 kW, 10-fold cross tying system, incl. chain belt conveyor.
Manufacturer BOA |
Type Impress D130-165-B-5/5L-1.9 |
Year of construction 2010 |
Hours of operation 11.318 h |
Press power main press 127 to |
Specific press capacity 10,7 kg/cm² |
Working pressure 280 bar |
Feed channel 1.920 x 972 mm (l x w) |
Press volume / cycle 4,1 cbm |
Throughput rate under operating conditions up to 965 cbm/h |
Cycle time under operating conditions 19 sec. |
Press stroke 2.900 mm |
Bale size 1.100 x 1.100 mm (w x h) length adjustable |
Driving power 3 x 55 kW |
Connected load 220 kW |
Tying system 5-fold vertical, 5-fold horizontal, fully automated |
Throughput rate at a |
bulk weight of 30 kg/cbm up to 20 to/h |
bulk weight of 50 kg/cbm up to 34 to/h |
bulk weight of 100 kg/cbm up to 44 to/h |
bulk weight of 150 kg/cbm up to 61 to/h |
Bale weight up to 1.200 kg |
Volume hydraulic oil tank 2.700 L |
SPS controller Siemens S 7 |
Operating panel Siemens Toughscreen Multi Panel |
Baler dimensions built up with hopper approx. 16.700 x 5.000 x 5.200 mm (l x w x h) |
Installation dimensions baler with conveyor belt approx. 28.000 x 17.000 x 7.500 mm (l x w x h) |
Transport dimensions baler approx 12.741 x 2.400 x 3.360 mm (l x w x h) |
Machine weight baler approx. 50 to |
Comments: The machine can be inspected after agreement. We will not assume liability for the given technical data and possible errors. |
|
Technical data conveyor belt |
Manufacturer BOA |
Type 2000 KTH HSB 29° 8.698 x 14.350 x 1.500 |
Year of construction 2010 |
Driving motor 11 kW |
Length belt 23.048 mm |
Belt speed 6,8 – 23,8 m/min. |
Length feeding conveyor 8.696 mm |
Length elevating conveyor 14.350 mm |
Length goose neck 1.500 mm |
Grade 29° |
Width belt 2.000 mm |
Quality of the belt EP 250-2-2-1 |
Chain ZMC ZC150 C125 15T |
Height of side wall feeding conv. 550 mm |
Height of side wall elevating conv. 775 mm |
Pit dimensions 13.200 x 3.400/2.940 x 1.100 mm (l x w x d) &aSpecification
Machine Type
Baler
Manufacturer
BOA
Model
Impress D130-165-B-5/5L-1.9
Year
2010
Hours of Operation
11318
Feed Channel (Length x Width)
1920 x 972
Press Power - Main Press
127 to
Bale Size (Width x Height x Length)
1100 x 1100 x adjustable
Driving Motor (Kw)
3 x 55 Glad you like it!
Boosting...
|